ALKEN EVEN-FLO® 910S

Effective Date: 03/15/2003


 Material Safety Data Sheet
 Manufacturer's Name: Alken-Murray Corporation
 Manufacturer's Address: P.O. Box 400, New Hyde Park, New York 11040
  T: 540-636-1236 Fax: 540-636-1770
  E-mail: msds@alken-murray.com 
 Manufacturer's Cage Code: 2A384

NFPA Hazard Ratings:

0=Minimal, 1=Slight, 2=Moderate, 3=Serious, 4=Severe


 Health=2

 Fire=2

 Reactivity=0

1. Product Identification

 Synonyms:  981/911
 CAS Number:  Not applicable to mixtures
 Chemical Formula:  mixture
 Formula ID Codes:  910.2

2. Composition/Information on Ingredients

 Chemical Name  CAS Number   OSHA PEL  ACGIH TLV  % Weight
 Aliphatic petroleum solvent (Naphtha)

 64742-88-7

 100 mg/M3

 100 mg/M3

 40-85
 Non-ionic surfactant

 9005-07-6

NDA 

 NDA

 5 - 25
 Aliphatic & cyclic amines

 61791-24-0

 NDA

 NDA

 5 - 30
 Manganese carboxylates

 mixture

5 mg/M3

 NDA

 < 1
  •  Manganese 2-Ethylhexanoate

 15956-58-8

 5 mg/M3

 0.2 mg/M3

 (see above)
  • Manganese Neodecanoate

27253-32-3

 5 mg/M3

  0.2 mg/M3

  (see above)
  • Manganese Stearate

3353-05-7

 5 mg/M3

  0.2 mg/M3

  (see above)

Ingredients not precisely identified are proprietary and/or non-hazardous. All chemical ingredients appear on the EPA TSCA inventory.

3. Hazards Identification

Emergency Overview: Caution: Eye and respiratory irritant.

Potential Health Effects:

  • Signs and Symptoms of Acute Overexposure: Eye, respiratory irritation, dizziness, fatigue, headache, unconsciousness or asphyxiation.
  • Signs and Symptoms of Chronic overexposure: Dermatitis and defatting of skin
  • Medical Conditions Generally Aggravated by Exposure: Allergies, chronic asthma may be exacerbated by fumes from this product..
  • Ingestion: Irritation of the mouth, pharynx, esophagus and stomach can develop following ingestion.

4. First Aid Measures

  • Inhalation: Remove victim to fresh air. If breathing is impaired, administer oxygen. Keep patient warm and quie.t
  • Ingestion: Do not induce vomiting. Give patient 2 - 4 glasses of water or milk to drink to dilute the product. Get medical advice.
  • Skin Contact: Remove contaminated clothing and footwear. Wash skin with soap and water. Wash clothing before reuse.
  • Eye Contact: Immediately flush eyes with water for 15 minutes. Get medical attention.
  • Note to Physician: None

 

5. Fire Fighting Measures

 Flash Point: 145 degrees F

Flammability Limits: NA

Autoignition temp: NA

Fire Extinguishing Media: Foam, water fog, carbon dioxide, dry chemical. Do not use a direct stream of water. Product will float and can be reignited on surface of water.

Special Fire-Fighting Information: When entering confined space, wear positive pressure NIOSH-approved SCNA, full bunker gear (helmet with face shield, bunker coats, gloves and rubber boots) Use water spray to cool containers, to prevent weakening of container structure or buildup of vapor pressure which could result in container rupture.

Unusual Fire and Explosion Hazards: Vapors are heavier than air and may travel along the ground.

6. Accidental Release Measures

Caution - combustible. Eliminate potential sources of ignition. Wear Appropriate respirator and other protective clothing. Contain spill. Remove with vacuum trucks or pump to storage/slavage vessels. Soak up residue with an absorbent such as clay, sand, or other suitable material; place in non-leaking containers and seal tightly for proper disposal. Flush area with water to remove trace residue dispose of flush solution as above.

For Small Spills: Take up with an absorbent material and place in a non-leaking container for proper disposal.

7. Handling and Storage

 Store in cool dry place. Keep container closed when not in use.

8. Exposure Controls/ Personal Protection

  • Ventilation System: Good general ventilation is advisable
  • Personal Respirators (NIOSH Approved): if needed, use respirator to screen out nuisance dust
  • Skin Protection: Long sleeved clothing and oil-resistant gloves
  • Eye Protection: Chemical safety goggles or face mask.
  • Other Control Measures:
ACGIH (TVL) Limits: CAS 64742-88-7 -100 ppm;
OSHA PEL: CAS 64742-88-7 -100 ppm;

9. Physical and Chemical Properties

  • Appearance and Color: Transparent light brown liquid.
  • Odor: Aromatic odor
  • Solubility in Water: Nil
  • Specific Gravity: 0.8155 at 70 degrees F
  • Kinematic viscosity at 100 deg. F: 3.21 cs
  • Density - lbs/gal: 6.799
  • pH: NA
  • % volatile by volume @ 21C (70F): NDA
  • Boiling Point: 400 degrees F, 100 degrees C
  • Melting Point: NA
  • Vapor Density (Air=1): = > 1
  • Vapor Pressure (mm Hg): = < 5
  • Evaporation Rate (Bu. Acetate=1): = < 1

10. Stability and Reactivity

  • Stability: Product is stable under normal conditions.
  • Hazardous Decomposition Products: Carbon monixide and ioxide on combustion
  • Hazardous Polymerization: will not occur.
  • Incompatibility: Strong oxidizers. May soften some plastics.
  • Conditions to Avoid: Incompatibilites.

11. Toxicological Information

  • Toxicological Data:
RTECS: CAS# 64742-88-7 WJ8925000
LD50 /LC50: CAS 64742-88-7: Acute oral LD50 > 25 ml/kg (rat); Acute oral LD50 >4 mg/kg (rabbit); Acute inhalation >700 ppm/4H (rat)
  • Carcinogenicity: Not listed by ACGIH, IARC, NIOSH, NTR, or OSHA

12. Ecological Information

  • Environmental Fate: CAS# 61791-24-0 is readily biodegradable by the closed bottle test.
  • Environmental Toxicity: CAS# 61791-24-0: 96 hr. LC50 = 0.39 mg/L for Zebra fish (nominal concentration)

13. Disposal Considerations

 RCRA Hazard Class (if discarded): This product is not considered a hazardous waste according to RCRA regulations. Wash containers down with water before disposal. Dispose in accordance with federal, state and local regulations for heating fuel.

14. Transportation Information

  • DOT Proper Shipping Name: Not regulated as hazardous by DOT when packaged in drums of 120 gallons
    --------------------------------------------------------------------------------------------------------------------------
    Containers above 120 gallons:
    DOT Proper Shipping Name:
    Petroleum Distillates, N.O.S. (Contains Petroleum Naphtha)
    DOT Hazard Class:
    NA for containers of < 120 gallons, otherwise class III, Combustible liquid
    Packing Group:
    III
    UN CODE:
    1268
    DOT Label:
    NA for containers of < 120 gallons, otherwise label as Environmentally Hazardous Substance, Liquid N.O.S

15. Regulatory Information

  • TSCA: All ingredients are listed on the TSCA inventory with no special reporting regulations.
  • CERCLA Reportable Quantity: Not subject to CERCLA reporting
  • SARA TITLE III:

..................................Section 302/304 Extremely Hazardous Substances: None

..................................Section 311 Hazard Categorization: Acute health, chronic, delayed health, Fire

..................................Section 313 Toxic Chemicals: None

  • STATE Right-To-Know Lists: on Pennsylvania, New Jersey, California, Massachusetts.
  • CLEAN AIR ACT: This product does not contain, nor does was it directly manufactured with any class I or II ozone depleting substances.
  • CLEAN WATER ACT/OIL POLLUTION ACT: This product is classified as an oil under Section 31 of the Water Act (40 CFR 110) and the Oil Pollution Act of 1990. Discharges or spills which produce a visible sheen on either surface water or waterways/sewers which lead to surface water, must be reported to the National Response Center at 800-424-8802.
  • CANADA: Ingredients listed on the Non-Domestic Substances List.
    WHMIS classification:
    CAS# 61791-24-0: 028, E
  • Not subject to Proposition 65 labeling requirements

16. Other Information

Reason for Revision: Revised formula

Alken-Murray Corporation provides the information contained herein in good faith, in compliance with the Occupational Safety and Health Act of 1970, but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Alken-Murray warrants that this product is of merchantable quality. The implied warranty of fitness for a particular purpose is limited to the extent the products are used for the purpose or uses described on the product's label or in any written instructions or materials distributed to the buyer by Alken-Murray and is hereby disclaimed should buyer use the products in a manner inconsistent with this uses or purposes described therein. In no event shall Alken-Murray be liable for any consequential, exemplary, or incidental damages incurred by buyer even if it has been advised of the possibility of such damages.

Alken-Murray link to homepage

E-mail: evenflo@alken-murray.com

  Clear-Flo || Even-Flo || Demulsifier || Polymers || Chemicals || American SH Cats