| |
Pour point depressant, cold-flow improver for residual fuel and crude oil. ALKEN® PDE 901 is a scientifically balanced blend of polymers and other ingredients designed to allow trouble-free winter operation. Contains no metals, halogens or sulfur. Low flashpoint (100.5 deg. F) prohibits shipment of samples by air. Dosage: 1 to 167 for high wax fuel down to 1 to 500 for low wax fuel. (2000 to 6000 ppm) Combustible/Flammable This formula cannot be shipped by air due to its low flash point, so a special trial 10% discount is offered for purchase of a single 5 gallon pail, shipped by ocean. | |
| Pour point depressant, cold-flow improver for lubricating oil. ALKEN® PDE 902 is a scientifically balanced blend of polymers and other ingredients designed to allow trouble-free winter operation. Contains no metals, halogens or sulfur. High flash point for safety. Dosage: 1 to 50 for high wax lube oil down to 1 to 334 for low wax lube oil. Non-combustible. | |
| Pour point depressant, cold-flow improver for distillate diesel fuel. ALKEN® PDE 903 is a scientifically balanced blend of polymers and other ingredients designed to allow trouble-free winter operation. Contains no metals, halogens or sulfur. High flash point for safety. Dosage: 1 to 500 for high wax fuel down to 1 to 2,000 for low wax fuel. Combustible | |
| Heavy-duty sludge dispersant, emulsifier, pre-combustion improver. No metallics. Dosage: 1 gallon for each 4,000 to 8,000 gal. fuel. Combustible. | |
| De-emulsifying, combustion improver. Protects tanks. Oxygen scavenger. Saves fuel. Wholly organic. Dosage: 1gallon for each 4,500 to 7,000 gallons of fuel. Combustible. | |
| Double strength EF 910. Dosage: 1 gallon for each 10,000 to 14,000 gallons of fuel. Combustible | |
| Emulsifying, combustion improver. Protects tanks, saves fuel, oxygen scavenger, wholly organic. Dosage: 1 gallon for each 4,500 to 7,000 gallons of fuel. Non-combustible. | |
| Double strength EF 910E - Dosage: 1 gallon for each 10,000 to 14,000 gallons of fuel. | |
| Surfactant-catalyst blend for combustion improvement and control of injector fouling in trucks Dosage: 1 gallon for each 1,000 gallons of fuel, depending on fuel quality and how dirty the engine is. (Currently off the market - see EF 911) | |
Surfactant-catalyst blend for combustion improvement and control of injector fouling in heavy diesel off-road vehicles. Dosage: 1 gallon for each 1,000 gallons of fuel, depending on fuel quality and how dirty the engine is. Combustible. Can also be used outside the US for on-road vehicles. Contains a less expensive manganese than MMT, which is the only manganese currently authorized by the USEPA for on-road use. | |
| Surfactant-catalyst blend for combustion improvement and control of injector fouling in heavy diesel off-road vehicles. Higher flashpoint and increased emulsifying properties as compared to EF 911. Dosage: 1 gallon for each 1,000 gallons of fuel, depending on fuel quality and how dirty the engine is. Non-combustible. | |
