| ALKEN® TREATMENT 72 is a unique blend of scale and deposition inhibitors designed to control scale and sludge in boilers using softened make-up. The special combination of chelating agents, polymer dispersants, and phosphates allows for occasional softener upsets, providing a very forgiving boiler water treatment program. |
|
| ALKEN® TREATMENT 72 dosages depend on the analysis of the make-up water, equipment operations, etc. Dosages for each installation are recommended by your ALKEN® representative based on his survey. Dosage is controlled by a color comparison test for phosphate. |
| ALKEN® TREATMENT 72 should be fed continuously to the feedwater system by a chemical metering pump. Feed point should be after the feedwater pump to avoid possible attack of the pump impeller. |
| Store in cool dry place. Store in a tightly closed container at moderate temperature, do not freeze. Wash thoroughly after handling. Use only in a well ventilated area. Avoid contact with skin, eyes, and clothing. Do not inhale or ingest |
ALKEN® TREATMENT 72 is packaged in LDPE
plastic pails and drums, in the following sizes: 5 gallon pail (49 lbs.),
15 gallons (148 lbs.), 30 gallons (296 lbs.) and 55 gallons (544 lbs.).
Update: 02-19-2007 |
| ALKEN® TREATMENT 72 complies with FDA regulations for boiler water additives used in the preparation of steam that will contact food, and was authorized by USDA for use in federally inspected meat and poultry plants |
