ALKEN® DISPERSE 33334 is a concentrated liquid blend of polymers and sequestrants for boiler scale control. The sequestrants solubilize calcium and magnesium under boiler water conditions. The polymers condition the boiler metal surfaces and disperse suspended solids in the boiler water to control deposition.
|
|
| Requirements for ALKEN® DISPERSE 334 will vary depending on the hardness of the boiler feedwater and the operating characteristics of the boiler. Typical requirement is 1 pint per 5000 gallons of feedwater. |
| ALKEN® DISPERSE 334 is readily miscible water. Dilution water should be softened or condensate. Treatment solution should be fed through a stainless steel injection nozzle or quill into the feedwater line on the discharge side of the feedwater pump |
| Store at moderate temperatures, in a dry place, away from acids and oxidizers. Keep container closed when not in use. Do not freeze. Avoid contact with liquid, mists or dried residues. Do not ingest or inhale. |
ALKEN® DISPERSE-334 is packaged in containers conforming to Performance Oriented Packaging Specifications, in the following sizes: 5 gallon pail (40 lbs.), 15 gallons (130 lbs.), 30 gallons (260 lbs.) and 55 gallons (490 lbs.). Update: 02-22-2007 |
| ALKEN® DISPERSE 334 complies with FDA 21 CFR 184.1139 regulations for boiler water additives used in preparation of steam that will contact food and was authorized by USDA for use in federally inspected meat and poultry plants, category "G6", "for use as a boiler water additive, used in the preparation of steam that WILL contact food". |
