ALKEN CLEAR-FLO® 5300 is a novel concentrated liquid cleaner that rapidly dissolves proteinaceous and cellulosic polymer deposits in dental vacuum lines, aspirators, chair-side traps , soft drink machine tower drain lines, etc.. ALKEN CLEAR-FLO® 5300 combines sodium metasilicate and alkyl glucoside surfactants to loosen debris, with powerful enzymes from ten non-pathogenic microbes to actually degrade line clogging deposits, rather than simply flushing them to later clog your building drain pipes. This unique combination reduces stress on pumps, by increasing the flow through tubing and drain lines. |
Bacteria count: | 60 million CFU/ml (227 billion CFU/gal) |
Appearance: | Light cyan |
Odor: | Ammonia |
pH: | 8.0 +/- 0.5 |
Stability: | 2 years at 5 - 35 deg.C (40 to 95 deg.F) |
|
|
|
Shake or stir THOROUGHLY immediately before using. Bacterial spores settle to the bottom of the pail or drum, more so in this formula than in many of our other blends. Do not use in conjuction with bleach, disinfectants or other chemicals, as these will inactivate this formula. |
DAILY: Mix 1 oz. with 15 oz. water to keep most systems clean. |
WEEKLY: Mix 2 oz. with 14 oz. water and flush through the tubes for more thorough cleaning. |
You may contact our first client for this product, Dr. Joe Uhrich at "dru@collegedrivedental.com" for additional information and recommendation. |
Shake or stir THOROUGHLY immediately before using. Bacterial spores settle to the bottom of the pail or drum, more so in this formula than in many of our other blends. Do not use in conjuction with bleach, disinfectants or other chemicals, as these will inactivate this formula. |
FOR BLOCKED LINES: Add 4 to 6 oz. per clogged drain each night until lines are free-flowing, then follow maintenance dosage, listed below. |
STARTUP: Add 2 to 3 oz. per tower drain line in the evening, every night for three successive nights. |
MAINTENANCE: Add 1 to 2 oz. per drain line each night to prevent cellulosic polymer plugs (sugar snakes). |
Blend slowly for a minimum of thirty minutes to assure proper dispersion of bacterial spores, surfactants and other ingredients into a uniform solution. Do not allow product to stand without agitation during repackaging or the product contents in each package may vary outside of specifications. If you dilute product before repackaging, please apply "private label" and adjust dosages to compensate for level of dilution. |
ALKEN CLEAR-FLO® 5300 is packaged in 5- gallon pails. Store in a cool place. Avoid contact with eyes, skin, and open wounds. Wash hands with soap and water after handling. Update - 06-07-2005 |