ALKEN ENZ-ODOR® 5C

Effective Date: 07/04/2005

 Product Bulletin


MSDS section divider line

 Material Safety Data Sheet
 Manufacturer's Name: Alken-Murray Corporation
 Manufacturer's Address: P.O. Box 400, New Hyde Park, New York 11040
  T: 540-636-1236 Fax: 540-636-1770
  E-mail: msds@alken-murray.com 
 Manufacturer's Cage Code: 2A384

MSDS section divider line

NFPA Hazard Ratings:

0=Minimal, 1=Slight, 2=Moderate, 3=Serious, 4=Severe

 Health=1  Fire=0  Reactivity=0

MSDS section divider line

Canadian WHMIS Classification D 2 B

All ingredients on Canadian DSL and USA TSCA lists

MSDS section divider line

 

1. Product Identification

 Synonyms:  none
 CAS Number:  Not applicable to mixtures
 Chemical Formula:  mixture
 Formula ID Codes:  10005.1

MSDS section divider line

2. Composition/Information on Ingredients

 Chemical Name

  CAS Number

 OSHA PEL

 ACGIH TLV
 % Weight

 Wheat bran

 116469-86-4

 NDA

 NDA

 25 - 35

  Dolomitic limestone*

  1317-65-3

 15 mg/m3

 15 mg/m3

 45 - 55

 Viable bacterial cultures

 NA

 NDA

 NDA

 1
 Milk By-products

  none

  NDA

  NDA

 < 1

 Yucca schidigera

 none

 NDA

 NDA

 20 - 30

 Tetrasodium EDTA

 64-02-8

 NDA

 NDA

 < 1

 Disodium phosphate

 7558-79-4

 15 mg/m3

 10 mg/m3

 < 1

 Monosodium Phosphate

 7558-80-7

 15 mg/m3

 10 mg/m3

 < 1

 *Contains Calcium carbonate, Magnesium carbonate, and Ferric oxide

Ingredients not precisely identified are proprietary and/or non-hazardous. All chemical ingredients appear on the EPA TSCA inventory.

MSDS section divider line

 3. Hazards Identification

Emergency Overview: Organisms used are non-pathogenic, but can cause infection when in contact with open wounds. These organisms are susceptible to many commonly used antibiotics.

Potential Health Effects:

  • Signs and Symptoms of Acute Overexposure: Eye, skin irritation
  • Signs and Symptoms of Chronic overexposure: Dermatitis and skin sensitization
  • Medical Conditions Generally Aggravated by Exposure: Allergies, dermatitis.
  • Ingestion: No effect if ingested in small amounts. Relative to other materials, a single dose of this product is rarely toxic by ingestion. Irritation of the mouth, pharynx, esophagus and stomach can develop following ingestion. DSP ingestion may result in abdominal pain, nausea, vomiting, diarrhea, shock, hypertension, slow pulse, cyanosis, coma and convulsions. MSP is used as a food additive with no adverse effects.

MSDS section divider line

4. First Aid Measures

  • Inhalation: Remove victim to fresh air
  • Ingestion: Give victim water or milk to drink to dilute the product. Get medical advice..
  • Skin Contact: Remove contaminated clothing and footwear. Wash skin with soap and water. Wash clothing before reuse.
  • Eye Contact: Immediately flush eyes with water for 15 minutes. Get medical attention.
  • Note to Physician: If patient's immune system is compromised, request antibiotic sensitivity chart from Alken-Murray Corporation by e-mail: clearflo@shentel.net

MSDS section divider line

5. Fire Fighting Measures

 Flash Point: NA

Flammability Limits: NA

Autoignition temp: NA

Fire Extinguishing Media: Water spray, carbon dioxide, dry chemical

Special Fire-Fighting Information: None

Unusual Fire and Explosion Hazards: None

 MSDS section divider line

6. Accidental Release Measures

For small spills, flush to waste treatment sewer (product is biodegradable). For large spills, contain and collect for reuse. Wear approved respirator for nuisance dust during cleanup.

MSDS section divider line

7. Handling and Storage

 Store in cool dry place. Keep container closed when not in use. Avoid storage of product above 110 degrees F and keep from freezing. Keep out of direct sunlight.

MSDS section divider line

8. Exposure Controls/ Personal Protection

  • Ventilation System: Good general ventilation is advisable
  • ACGIH limits: Magnesium carbonate, 1 mg/M3
  • OSHA PELs: Magnesium carbonate: 10mg/M3 ; Total Vacated PELs: total dust: 15 mg/M3 TWA; respirable fraction: 5 mg/M3 TWA
  • Personal Respirators (NIOSH Approved): if needed, use respirator to screen out nuisance dust
  • Skin Protection: Long sleeved clothing
  • Eye Protection: Safety glasses if dust is raised
  • Other Control Measures: Minimize exposure in accordance with good hygiene practice. Avoid handling which would create large amounts of dust.
  • OSHA PEL: nuisance dust limit of 15 mg/m3 (for Dolomitic limestone, DSP & MSP ACGIH TLV: nuisance dust limit of 10 mg.m3 (for Dolomitic limestone, DSP & MSP)

MSDS section divider line

9. Physical and Chemical Properties

  • Appearance and Color: Free-flowing greyish tan powder
  • Odor: Faint sweet cereal-like
  • Solubility in Water: Partially, contains viable bacteria
  • Specific Gravity:
  • Bulk density: Approximately 0.79 gm/cm3
  • pH: 6.5-8.0
  • % volatile by volume @ 21C (70F): Nil
  • Boiling Point: NA
  • Melting Point: NA
  • Vapor Density (Air=1): NA
  • Vapor Pressure (mm Hg): NA
  • Evaporation Rate (Bu. Acetate=1): NA

MSDS section divider line

10. Stability and Reactivity

  • Stability: Product is stable.
  • Hazardous Decomposition Products: None
  • Hazardous Polymerization: will not occur.
  • Incompatibility: Acids, alkalies, other toxic materials may inactivate biological cultures.
  • Conditions to Avoid: Incompatible substances

MSDS section divider line

11. Toxicological Information

  • Toxicological Data: Ingredients have long been safely used around animals and humans with no deleterious effects.
    RTECS: CAS# 1317-65-3: EV9580000/ Bacterial cultures: 1004274VB/ CAS# 116469-86-4: 1012301CS/ CAS# 7558-80-7: WA1900000/ CAS# 64-02-8: AH5075000/ CAS# 7558-79-4: WC4500000/ CAS# 7732-18-5: ZC0110000
  • LD50/LC50: Yucca schidigera - Oral toxicity for a 70% solution is > 5000 mg/kg
  • Carcinogenicity: Ingredients not listed by ACGIH, IARC, NIOSH, NTR, or OSHA

MSDS section divider line

12. Ecological Information

 Environmental Fate: This product is not likely to bio-concentrate, if mixed with water. This product released directly or indirectly into the environment is not expected to have a significant impact.

Environmental Toxicity: This formula has a low potential to affect aquatic organisms, secondary waste treatment microorganisms, and the growth of some plants.

 MSDS section divider line

13. Disposal Considerations

 RCRA Hazard Class (if discarded): Dispose of in a manner consistent with federal, state, and local regulations.
RCRA D-Series Maximum Concentration of Contaminants:
None listed.
RCRA D-Series Chronic Toxicity Reference Levels:
None listed.
RCRA F-Series:
None listed.
RCRA P-Series:
None listed.
RCRA U-Series:
None listed.
Not listed as a material banned from land disposal according to RCRA.

Wash containers down with water and disinfect with a 1% sodium hypochlorite solution before unregulated disposal.

MSDS section divider line

14. Transportation Information

  • DOT Proper Shipping Name: Not regulated as hazardous by DOT
  • DOT Hazard Class: None
  • DOT Label: N/A

MSDS section divider line

15. Regulatory Information

  • TSCA: All chemical ingredients are listed on the TSCA inventory. None of the ingredients are on the Health and Safety Reporting List, are under Chemical Test rule, are listed under TSCA Section 12B, or have a SNUR under TSCA.
  • CERCLA Reportable Quantity: None
  • SARA TITLE III:

Section 302/304 Extremely Hazardous Substances: None

Section 311 Hazard Categorization: Acute, chronic

Section 313 Toxic Chemicals: None

  • STATE Regulations: None of the ingredients, except magnesium carbonate, can be found on the following state right to know lists: New Jersey, Florida, Pennsylvania, Massachusetts. Magnesium carbonate IS listed on the Minnesota and Massachusetts right-to-know lists.
  • California No Significant Risk Level: None of the chemicals in this product are listed.
  • CWA: Ingredients not listed as hazardous pollutants under CWA.
  • CAA: Ingredients not listed as hazardous pollutants under CAA
  • OSHA: None of the ingredients are considered Extremely Hazardous by OSHA.
  • WKG (water danger/protection): NDA
  • Canadian WHMIS Classification: Class D2B
  • Canadian DSL/NDSL: All ingredients are compliant for export to Canada
  • Not subject to California Proposition 65 labeling requirements

MSDS section divider line

16. Other Information

Reason for Revision: Routine review and revision

Alken-Murray Corporation provides the information contained herein in good faith, in compliance with the Occupational Safety and Health Act of 1970, but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Alken-Murray warrants that this product is of merchantable quality. The implied warranty of fitness for a particular purpose is limited to the extent the products are used for the purpose or uses described on the product's label or in any written instructions or materials distributed to the buyer by Alken-Murray and is hereby disclaimed should buyer use the products in a manner inconsistent with this uses or purposes described therein. In no event shall Alken-Murray be liable for any consequential, exemplary, or incidental damages incurred by buyer even if it has been advised of the possibility of such damages. 

link to homepage Alken-Murray

E-mail: enzodor@alken-murray.com

  Clear-Flo || Even-Flo || Demulsifier || Polymers || Chemicals || American SH Cats

 Dry Product Index

 Liquid Product Index

 Nutrient Index