NFPA Hazard Ratings:

0=Minimal, 1=Slight, 2=Moderate, 3=Serious, 4=Severe

 2. Composition/Information on Ingredients

 3. Hazards Identification

Emergency Overview: The microorganisms used in this product are BioSafety Class 1 microorganisms, as defined by the Centers for Disease Control as unlikely to cause disease in healthy humans or animals. However, persons with compromised immune systems should avoid contact with open wounds and/or breathing dust or mist from manufacturing processes. These organisms are susceptible to many commonly used antibiotics, and Alken-Murray is willing to supply antibiotic sensitivity information to any doctor or import health authority requesting it. Because surfactants are included, primary skin irritation under 29CFR 1910.1200 is considered possible, as is true of many shampoos that contain the same surfactants. Although bacterial cultures included in this product were grown in a sterile aqueous medium containing a variety of nutrients, including corn syrup solids, digests of soybean and/or skim milk, glucose or other sugars, vegetable oils, including olive oil, yeast extract, mineral salts, etc., the concentrations of these residual nutrients are believed to be below levels capable of triggering irritation.
Potential Health Effects:

Signs and Symptoms of Acute Overexposure: Eye, skin irritation Signs and Symptoms of Chronic overexposure: Dermatitis and skin sensitization Medical Conditions Generally Aggravated by Exposure: Allergies, dermatitis. Ingestion: May result in abdominal pain, nausea and vomiting.

 4. First Aid Measures

 5. Fire Fighting Measures

 6. Accidental Release Measures

 7. Handling and Storage

 8. Exposure Controls/ Personal Protection

• Appearance and Color: .Opaque grey-green liquid
• Odor: "Wild hyacinth" fragrance added
• Solubility in Water: 99%
• Specific Gravity: 1.0
• Bulk density: NDA
• pH: 6.8 - 7.2
• % volatile by volume @ 21C (70F): . Nil
• Boiling Point: 212 degrees F, 100 degrees C
• Melting Point: 32 degrees F
• Vapor Density (Air=1): =water
• Vapor Pressure (mm Hg): =water
• Evaporation Rate (Bu. Acetate=1): =water

• Stability: Product is stable.
• Hazardous Decomposition Products: . None
• Hazardous Polymerization: will not occur.
• Incompatibility: Acids, alkalies, other toxic materials may inactivate biological cultures.
• Conditions to Avoid: Incompatible substances

• Toxicological Data:

RTECS: CAS 7732-18-5: ZC0110000/ CAS# 61789-40-0: 1007217CB / Fragrance: 1002064FR/ Bacterial cultures: 1003657BA / CAS#223749-05-1:NDA / CAS#68140-00-1: NDA / CAS# 9004-82-4: WB7499000 / CAS 2634-33-5: 1004600BE/ CAS 1310-73-2: WB4900000/ CAS 25265-71-8: UB8765000/ CAS 64-02-8: AH5075000/ CAS# 134-20-3: CB3325000/ CAS# 123-31-9: MX3500000

LD50/LC50 - Individual Ingredients: CAS# 7732-18-5: LD50= >90 mL/Kg / CAS# 61789-40-0: Oral, mouse LD50 = 4900 mg/Kg; Dermal,albino rabbif LD50 = > 2000 mg/Kg / CAS# 223749-05-1 (Yucca schidigera) - Oral, mouse, LC50 of a 70% solution = > 5000 mg/kg / CAS# 68140-00-1:Oral, rat LD50 = 1200 mg/Kg / CAS# 9004-82-4: Oral, rat LD50 = 1620 mg/Kg / CAS# 2634-33-5, oral, rat LD50 = 20 g/Kg / CAS# 1310-73-2: skin, rabbit: 500 mg/24H severe; eye rabbit: 50 ug/24H severe / CAS 25265-71-8 eye-rabbit 510 mg skin-rabbit 500 mg/24H MLD; LD50 oral rat 14850 mg/kg; LD50 oral guinea pig 17600 mg/kg / CAS# 64-02-8: Oral, rat LD50 = > 1,000 mg/Kg; Oral, rabbit, LD50 = > 2,000 mg/Kg / CAS# 134-20-3: Oral, rat LD50 =:3000 mg/kg, Oral, mouse LD50 = 3900 mg/kg, Oral LD50 Guinea pig: 2780 mg/kg; 24 hour skin rabbit: moderate / Blue polymer dye: Oral, rat LD50 = >5,000 mg/Kg / CAS# 123-31-9: Oral, rat LD50 = 8470 mg/Kg; Oral, mouse LD50 = 245 mg/Kg

 

Dermal & Eye Irritation Tests for the Proprietary "Oxygenated organic/inorganic salts Solution" - sold as ALKEN® 896 BIOSTIMULANT
Acute dermal irritation study New Zealand white rabbits: A 20% solution of our proprietary
"Oxygenated organic/inorganic salts Solution" 5 ml + 20 mL sterile, distilled water) was applied to intact & abraded skin one one side, with sterile water applied to intact & abraded skin on other side of same animals to serve as controls.
Acute dermal irritation New Zealand white rabbits: PI = 0.0, Toxicity level IV
Acute eye irritation: A 20% solution (5 ml "Oxygenated organic/inorganic salts Solution" + 20 mL sterile, water) was introduced to one eye, while untreated eye was observed as a "control". Eyes were examined and graded at 24, 48 and 72 hours post treatment..
Acute eye irritation, :New Zealand white rabbits: PI=0.0, Toxicity IV

Bacteria in this product: Acute oral toxicity: Rats LD50 = > 5 grams/kg, no toxicity symptoms, no weight loss

Acute dermal toxicity: LD50 = > 5050 mg/Kg

Acute dermal irritation albino rabbits: PI = 0.0, Toxicity level IV

Acute eye irritation: PI=0.0, Toxicity IV
Acute Inhalation, Rats LC50= >2.43 mg/L.

• Carcinogenicity:

ACGIH-A3 Hydroquinone, CAS# 123-31-9 "confirmed animal carcinogen". Not listed on IARC, NIOSH, OSHA or NTP

Other ingredients are NOT found on any lists published by ACGIH, IARC, NIOSH, NTP or OSHA

Environmental Fate: This product is not likely to bio-concentrate, if mixed with water. This product released directly or indirectly into the environment is not expected to have a significant impact.

Environmental Toxicity: This material has a low potential to affect aquatic organisms, secondary waste treatment microorganisms, and the growth of some plants. Ammonia: Fish toxicity - 1600 µg/L 96 hour LC50 (mortality) common jollytail. Coconut based surfactants including CAS# 6178-40-0, 68140-00-1 and 9004-80-4 present low volatility and an aquatic LC50 of 0.2 to 59 mg, and since the included bacteria use them as a food source, minimal environmental impact is expected.

Aquatic Ecotoxicity of Individual Ingredients: CAS# 2634-33-1, 1,2 benzisothiazolin-3-one (<1%) is VERY toxic to aquatic organisms (Fish, LC50, 4 days exposure = 1.0 - 3.3 ppm. Crustaceans (Daphnia magna) EC50 immobilization = 2 days exposure 0.85 ppm. CAS# 123-31-9, Hydroxyquinone (<0.1%): Rainbow Trout LC50 = 0.097 mg/L; 96H, Fathead Minnow LC50 = 0.1 - 0.18 mg/L, 96H, Hydroxyquinone will biodegrade easily.

Biodegradability: CAS# 2634-33-1 will biodegrade by 81.9% within 20 days. All three coconut-based surfactants are easily biodegraded, when tested using OECD protocol. Although present as a trace amount, the naturally high BOD of this chemical will shorten bioremediation time needed, as it binds with soil and humified compounds with natural negative charges. For further details on OECD protocol, see "OECD Guidelines for Testing Chemicals", 1981, ISBN 92-64-12221-

• DOT Proper Shipping Name: Not regulated as hazardous by DOT
• DOT Hazard Class: None
• DOT Label: The proper shipping name for UNREGULATED SHIPMENT via DOT and TDG is as follows: "Class 55 (Item 048580, sub 3): "Cleaning or washing compound NOI, liquid, in drums or pails".

• TSCA: (40CFR 710) All chemical ingredients are listed on the TSCA 8(b) inventory. None of the ingredients are on the Health and Safety Reporting List, are under Chemical Test rule, are listed under TSCA Section 12B, or have a SNUR under TSCA
• CERCLA Reportable Quantity: Hazardous ingredients are all below de minimus concentrations under US 40 CFR 117.302
  
• SARA TITLE III:

  Section 302/304 Extremely Hazardous Substances: Hazardous ingredients are all below de minimus concentrations Section 311 Hazard Categorization: Acute, chronic Section 313 Toxic Chemicals: This material contains sodium hydroxide (CAS 1310-73-2) which is subject to reporting requirements of Section 313 or Sara Title III and 40 CFR Part 373. 1,000 lb Final RQ (454 Kg). Product has NEUTRAL PH, cancelling reporting requirements.

• Clean WaterAct: Ingredients not listed as hazardous pollutants under CWA.
• Clean Air Act: ONLY CAS# 123-31-9, Hydroxyquinone IS listed as a hazardous air pollutants (HAP) on CWA. This product does not contain any Class 1 or Class 2 ozone depletors, nor was it made with such chemicals.
• OSHA: Sodium hydroxide is considered Extremely Hazardous by OSHA.
• STATE RIGHT-TO-KNOW LAWS: Dipropylene glycol (< 1%), CAS# 25265-71-8 IS IS found on the Pennsylvania RTK list. Glycerine (2.5%), CAS# 56-81-5 IS found on the following RTK lists: Pennsylvania, Minnesota, Massachusetts & Rhode Island. Sodium hydroxide, CAS#1310-73-2, comprising < 1% of this product and Hydroquinone, CAS#123- 31-9, comprising <0.01% of this product can be found on the following RTK lists: California, New Jersey, Florida, Pennsylvania, Minnesota & Massachusetts. Other ingredients NOT listed on the following RTK lists: California, Connecticut, Florida, Illinois, Louisiana, Maine, Maryland, Massachusetts, Minnesota, New Jersey, New York, Pennsylvania, Rhode Island or Tennessee.
• California Proposition 65 Labeling Required: This product contains < 0.01% of Hydroquinone (CAS# 123-31-9), a chemical known to the state of California to cause cancer and/or birth defects and/or reproductive harm.
• Canadian WHMIS Class D2B. (Other toxic effects - for surfactants & imported LIVE microbial cultures). CAS# 1310-73-2 & 64-02-8 (combined at < 1%) normally add a "Class E" to products containing them, but the neutral pH of THIS product exempts it from this addition.
• Canadian DSL: All ingredients listed. Approved for sale in Canada
• Canada's Ingredient Disclosure List: Sodium hydroxide, CAS 1310-73-2, comprising < 1% of this product and Hydroquinone, CAS# 123-31-9, comprising < 0.01% of this product ARE listed on the CIDL, , but other ingredients are "NOT CONTROLLED". . This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR.
• TDG Classification: This product is not subject to "hazardous goods" descriptions and transport surcharges.
  
  

 16. Other Informatio

Reason for Revision: Routine review & revision

.Alken-Murray Corporation provides the information contained herein in good faith, in compliance with the Occupational Safety and Health Act of 1970, but makes no representation as to its comprehensiveness or accuracy. This document is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Alken-Murray warrants that this product is of merchantable quality. The implied warranty of fitness for a particular purpose is limited to the extent the products are used for the purpose or uses described on the product's label or in any written instructions or materials distributed to the buyer by Alken-Murray and is hereby disclaimed should buyer use the products in a manner inconsistent with this uses or purposes described therein. In no event shall Alken-Murray be liable for any consequential, exemplary, or incidental damages incurred by buyer even if it has been advised of the possibility of such damages.