|Product Technical Bulletin|
ALKEN® SOLUTIONS C186K is a water soluble cationic quaternary ammonium polyelectrolyte, poly-dimethyl-dialkyl ammonium chloride. Alken® Solutions C186K can be used as a wastewater coagulant in the mining and mineral processing industries, as a coagulant in water plants, as a primary coagulant in biological wastewater facilities, or as a filtration aid.
If there is enough interest in using this product for drinking water applications, we will apply for certification from NSF, for use at a mazimum concentration of 50 mg/l.
|Bulk Density:||8.7 lbs/gal|
|Viscosity at 25 deg C:||60-180 cps|
|Freezing Point:||12 deg. F|
|pH:||5.0 - 7.0|
6 months from delivery
1% solution lasts 4 weeks
0.1 % solution lasts 24 hours
ALKEN® SOLUTIONS C186K should be fed using a corrosion resistant positive displacement pump and should be prepared at a solution concentration of 0.25 - 2.5%. Feed the diluted product at a point that insures complete mixing. A laboratory "jar test" should be performed to determine both the correct product and the correct dosage.
PACKAGING and HANDLING:
ALKEN® SOLUTIONS C186K is generally
packaged in 55-gallon (500 lbs) steel drums or 275 gallon tote bins (2290
lbs), which conform to Performance Oriented Packaging Specifications. This
product should not be used until a Material Safety Data Sheet has been reviewed
by supervisory and operating personnel. Store in a clean, dry area. Do not
use aluminum or iron in feed or storage systems. If freezing occurs, the
product may be used after being thawed and throughly mixed. Keep containers
closed when not in use and discard when empty. CAUTION: Spilled
product is very slippery. Low temperatures may cause pumping problems due
to increased in product viscosity. Harmonized Tariff Code: 2921.21.0000
Acyclic polyamine polymer